View TB62706BN06_4111850.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TB62706BN/BF
TOSHIBA Bi-CMOS INTEGRATED CIRCUIT SILICON MONOLITHIC
TB62706BN,TB62706BF
16BIT SHIFT REGISTER, LATCHES & CONSTANT CURRENT DRIVERS
The TB62706BN, TB62706BF is specifically designed for LED and LED DISPLAY constant current drivers. This constant current output circuits is able to set up external resistor (IOUT = 5~90 mA). (Note) This IC is monolithic integrated circuit designed to be used together with Bi-CMOS process. The devices consist of 16bit shift register, latch, AND-GATE and Constant Current Drivers.
TB62706BN
FEATURES
Constant Current Output : Can set up all output current with one resister for 5 to 90 mA.
TB62706BF
Maximum Clock Frequency : fCLK = 15 (MHz) (Cascade Connected Operate, Topr = 25C) 5 V C-MOS Compatible Input Package : SDIP24-P-300-1.78~1.778mmPitch~ (TB62706BN) SSOP24-P-300-1.00B~1.0mmPitch~ (TB62706BF) Constant Output Current Matchong:
OUTPUT-GND VOLTAGE 0.4 V 0.7 V CURRENT MATCHING 6.0% 6.0% OUTPUT CURRENT 5~40 mA 5~90 mA
Weight SDIP24-P-300-1.78: 1.22 g (typ.) SSOP24-P-300-1.00B: 0.32 g (typ.)
(Note)
Note:
TB62706BF can be used under limited PD (PD 1.04 W, with PCB)
1
2006-06-14
TB62706BN/BF
PIN CONNECTION (Top view)
BLOCK DIAGRAM
TIMING DIAGRAM
Note:
Latches are level sensitive, not rising edges sensitive and not syncronus CLOCK. Input of LATCH-terminal to H Level, data passes latches, and input to L level, data hold latches. Input of ENABLE-terminal to H level, all output (OUT0~15) do off.
2
2006-06-14
TB62706BN/BF
TERMINAL DISCRIPTION
PIN No. 1 2 3 4
5~20 21 22 23 24
PIN NAME GND SERIAL-IN CLOCK
LATCH
OUT0 ~ 15 ENABLE SERIAL-OUT R-EXT VDD
FUNCTION GND terminal for control logic. Input terminal of a serial-data for shift-register. Input terminal of a clock for data shift to up-edge.
Input terminal of a data strobe. Latches passes data with "H" level input of LATCH -terminal, and hold data with "L" level input.
Output terminals. Input terminal of output enable. All outputs (OUT0~15) do off with "H" level input of ENABLE -terminal, and do on with "L" level input. Output terminal of a serial-data for next SERIAL-IN terminal. Input terminal of connects with a resister for to set up all output current. 5 V Supply voltage terminal.
TRUTH TABLE
CLOCK
LATCH
ENABLE L L L L H
SERIAL-IN Dn Dn+1 Dn+2 Dn+3 Dn+3
OUT0 *** OUT7 *** OUT15 Dn *** Dn-7 *** Dn-15 No change Dn+2 *** Dn-5 *** Dn-13 Dn+2 *** Dn-5 *** Dn-13 Off
SERIAL-OUT Dn-15 Dn-14 Dn-13 Dn-13 Dn-13
UP UP UP DOWN DOWN
H L H X X
Note:
OUT0 ~ 15 = on in case of Dn = H level and OUT0 ~ 15 = off in case of Dn = L level. A resistor is connected with R-EXT and GND accompanied with outside, and it is necessary that a correct power supply voltage is supplied.
EQUIVALENT CIRCUIT OF INPUTS AND OUTPUTS
1. ENABLE terminal 2. LATCH terminal
3. CLOCK, SERIAL-IN terminal
4. SERIAL-OUT terminal
3
2006-06-14
TB62706BN/BF
ABSOLUTE MAXIMUM RATINGS (Ta = 25C)
CHARACTERISTIC Supply Voltage Input Voltage Output Current Output Voltage Clock Frequency GND Terminal Current Power Dissipation SYMBOL VDD VIN IOUT VOUT fCK IGND PD RATING 0~7.0 -0.4~VDD + 0.4 90 -0.5~17.0 15 1440 1.78 (BN-type : ON PCB, Ta = 25C ) 1.00 (BF-type : ON PCB, Ta = 25C ) BN : 70 (BN-type : ON PCB) BF : 120 (BF-type : ON PCB) -40~85 -55~150 UNIT V V mA V MHz mA W
Tharmal Resistance Operating Temperature Storage Temperature
Rth (j-a) Topr Tstg
C / W C C
Note:
BN-type :Ambient temperature delated above 25C in the proportion of 14.2 mW / C BF-type : Ambient temperature delated above 25C in the proportion of 8.3 mW / C
RECOMMENDED OPERATING CONDITION (Ta = -40~85C unless otherwise noted)
CHARACTERISTIC Supply Voltage Output Voltage SYMBOL VDD VOUT IO Output Current IOH IOL VIH Input Voltage VIL LATCH Pulse Width CLOCK Pulse Width ENABLE Pulse Width Set-Up Time for DATA Hold Time for DATA Set-Up Time for LATCH Hold Time for LATCH Clock Frequency Power Dissipation t w LAT tw CLK t w EN tsetup (D) thold (D) tsetup (L) thold (L) fCLK PD Cascade operation Ta = 85C (BN-type) Ta = 85C (BF-type) VDD = 4.5~5.5 V CONDITION OUTn, DC 1 circuit SERIAL-OUT SERIAL-OUT MIN 4.5 5 0.7 VDD -0.3 100 50 4500 60 20 100 60 TYP. 5.0 MAX 5.5 15.0 88 1.0 -1.0 VDD +0.3 0.3 VDD 10.0 0.92 0.50 mA UNIT V V
V
ns ns ns ns ns ns ns MHz W
4
2006-06-14
TB62706BN/BF
ELECTRICAL CHARACTERISTICS (VDD = 5.0 V, Ta = 25C unless otherwise noted)
CHARACTERISTIC "H" Level Input Voltage "L" Level Output Leakage Current Output Voltage SERIAL-OUT VIL IOH VOL VOH IOL1 IOL2 Current Skew Ta = -40~85C VOH = 15.0 V IOL = 1.0 mA IOH = -1.0 mA VCE = 0.7 V VCE = 0.4 V IO = 40 mA, VCE = 0.4 V VCE = 1.0 V VCE = 0.7 V IO = 75 mA, VCE = 0.7 V REXT = 470 , Ta = -40~85C REXT = OPEN, OUT0 ~ 15 = off REXT = 470 , OUT0 ~ 15 = off REXT = 250 , OUT0 ~ 15 = off REXT = 470 , OUT0 ~ 15 = on REXT = 250 , OUT0 ~ 15 = on REXT = 470 (Include current matching) REXT = 470 REXT = 250 (Include current matching) REXT = 250 SYMBOL VIH TEST CIR- CUIT CONDITION Ta = -40~85C MIN 0.7 VDD GND 4.6 34.1 33.7 64.2 63.8 150 100 3.5 6.5 10.0 18.0 TYP. 40.0 39.5 1.5 75.5 75.0 1.5 1.5 300 200 0.6 5.8 10.7 16.0 28.3 MAX VDD 0.3 VDD 10 0.4 45.9 45.3 6.0 86.8 86.2 6.0 5.0 600 400 1.2 8.0 15.0 22.0 38.5 mA V UNIT
A V
Output Current 1
mA
IOL1
IOL3 IOL4
%
Output Current 2
mA
Current Skew Supply Voltage Regulation Pull-Up Resistor Pull-Down Resistor
IOL2 % / VDD RIN (up) RIN (down) IDD (off) 1
% %/V
"OFF" Supply Current
IDD (off) 2 IDD (off) 3
"ON"
IDD (on) 1 IDD (on) 2
5
2006-06-14
TB62706BN/BF
SWITCHING CHARACTERISTICS (Ta = 25C unless otherwise noted)
CHARACTERISTIC CLK- OUTn Propagation Delay Time ("L" to "H") LATCH OUTn ENABLE OUTn CLK-SOUT CLK- OUTn Propagation Delay Time ("H" to "L") LATCH OUTn ENABLE OUTn CLK-SOUT Pulse Width CLK LATCH L-H H-L L-H H-L tw CLK t w LAT tsetup (L) tsetup (C) thold (L) thold (C) tr tf tor tof tpHL VDD = 5.0 V VCE = 0.4 V VIH = VDD VIL = GND REXT = 470 VL = 3.0 V RL = 65 CL = 10.5 pF tpLH SYMBOL TEST CIR- CUIT CONDITION MIN 15 15 150 150 TYP. 1200 1200 1200 30 700 700 700 30 20 10 25 25 0 0 300 300 MAX 1500 1500 1500 70 1000 1000 1000 70 30 25 50 50 15 15 10 10 600 600 ns ns ns ns ns ns s s ns ns ns ns UNIT
Set-up Time
Hold Time

Maximum CLOCK Rise Time Maximum CLOCK Fall Time Output Rise Time Output Fall Time
6
2006-06-14
TB62706BN/BF
TEST CIRCUIT
DC characteristic
AC characteristic
PRECAUTIONS for USING
Utmost care is necessary in the design of the output line, VCC (VDD) and GND line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding.
7
2006-06-14
TB62706BN/BF
TIMING WAVEFORM
1. CLOCK-SERIAL OUT, OUTn
2. CLOCK- LATCH
3. ENABLE -OUTn
8
2006-06-14
TB62706BN/BF
9
2006-06-14
TB62706BN/BF
LED DRIVER TB6270X SERIES APPICATION NOTE
Fig.1
10
2006-06-14
TB62706BN/BF
[1] [2] Output current (IOUT) IOUT is set by the enternal resistor (R-EXT) as shown in Fig.1. Total supply voltage (VLED) This device can operate 0.4~0.7V (VO). When a higher voltage is input to the device, the excess voltage is consumed inside the device, that leads to power dissipation. In order to minimize power dissipation and loss, we would like to recommend to set the total supply voltage as shown below,
VLED (total supply voltage) = VCE (Tr Vsat) + Vf (LED Forward voltage) + VO (IC supply voltage) When the total supply is too high considering the power dissipation of this device, an additional R can decrease the supply voltage (VO).
[3]
Pattern layout This device owns only one ground pin that means signal ground pin and power ground pin are common. If ground pattern layout contains large inductance and impedance, and the voltage between ground and LATCH, CLOCK terminals exceeds 2.5 V by switching noise in operation, this device may miss-operate. So we would lile you to pay attention to pattern layout to minimize inductance.
11
2006-06-14
TB62706BN/BF
Package Dimensions
Weight: 1.22 g (typ.)
12
2006-06-14
TB62706BN/BF
Package Dimensions
Weight: 0.32 g (typ.)
13
2006-06-14
TB62706BN/BF
Notes on Contents
1. Block Diagrams
Some of the functional blocks, circuits, or constants in the block diagram may be omitted or simplified for explanatory purposes.
2. Equivalent Circuits
The equivalent circuit diagrams may be simplified or some parts of them may be omitted for explanatory purposes.
3. Timing Charts
Timing charts may be simplified for explanatory purposes.
4. Application Circuits
The application circuits shown in this document are provided for reference purposes only. Thorough evaluation is required, especially at the mass production design stage. Toshiba does not grant any license to any industrial property rights by providing these examples of application circuits.
5. Test Circuits
Components in the test circuits are used only to obtain and confirm the device characteristics. These components and circuits are not guaranteed to prevent malfunction or failure from occurring in the application equipment.
14
2006-06-14
TB62706BN/BF
IC Usage Considerations
Notes on Handling of ICs
(1) The absolute maximum ratings of a semiconductor device are a set of ratings that must not be exceeded, even for a moment. Do not exceed any of these ratings. Exceeding the rating(s) may cause the device breakdown, damage or deterioration, and may result injury by explosion or combustion. Use an appropriate power supply fuse to ensure that a large current does not continuously flow in case of over current and/or IC failure. The IC will fully break down when used under conditions that exceed its absolute maximum ratings, when the wiring is routed improperly or when an abnormal pulse noise occurs from the wiring or load, causing a large current to continuously flow and the breakdown can lead smoke or ignition. To minimize the effects of the flow of a large current in case of breakdown, appropriate settings, such as fuse capacity, fusing time and insertion circuit location, are required. If your design includes an inductive load such as a motor coil, incorporate a protection circuit into the design to prevent device malfunction or breakdown caused by the current resulting from the inrush current at power ON or the negative current resulting from the back electromotive force at power OFF. IC breakdown may cause injury, smoke or ignition. Use a stable power supply with ICs with built-in protection functions. If the power supply is unstable, the protection function may not operate, causing IC breakdown. IC breakdown may cause injury, smoke or ignition. Do not insert devices in the wrong orientation or incorrectly. Make sure that the positive and negative terminals of power supplies are connected properly. Otherwise, the current or power consumption may exceed the absolute maximum rating, and exceeding the rating(s) may cause the device breakdown, damage or deterioration, and may result injury by explosion or combustion. In addition, do not use any device that is applied the current with inserting in the wrong orientation or incorrectly even just one time. Carefully select external components (such as inputs and negative feedback capacitors) and load components (such as speakers), for example, power amp and regulator. If there is a large amount of leakage current such as input or negative feedback condenser, the IC output DC voltage will increase. If this output voltage is connected to a speaker with low input withstand voltage, overcurrent or IC failure can cause smoke or ignition. (The over current can cause smoke or ignition from the IC itself.) In particular, please pay attention when using a Bridge Tied Load (BTL) connection type IC that inputs output DC voltage to a speaker directly.
(2)
(3)
(4)
(5)
Points to Remember on Handling of ICs
(1) Heat Radiation Design In using an IC with large current flow such as power amp, regulator or driver, please design the device so that heat is appropriately radiated, not to exceed the specified junction temperature (Tj) at any time and condition. These ICs generate heat even during normal use. An inadequate IC heat radiation design can lead to decrease in IC life, deterioration of IC characteristics or IC breakdown. In addition, please design the device taking into considerate the effect of IC heat radiation with peripheral components. Back-EMF When a motor rotates in the reverse direction, stops or slows down abruptly, a current flow back to the motor's power supply due to the effect of back-EMF. If the current sink capability of the power supply is small, the device's motor power supply and output pins might be exposed to conditions beyond maximum ratings. To avoid this problem, take the effect of back-EMF into consideration in system design.
(2)
15
2006-06-14
TB62706BN/BF
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice. 021023_D
060116EBA
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. 021023_A * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. 021023_B * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. 021023_C * The products described in this document are subject to the foreign exchange and foreign trade laws. 021023_E
16
2006-06-14

▲Up To Search▲

Price & Availability of TB62706BN06

	To Download TB62706BN06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .